Luy Machinery Equipment CO., LTD
Customized Autoclave Carbon Steel or Stainless Steel
Add to Cart
Automatic Control Temperature Food Sterilizer Machine More Than 10 Years Experience
Ⅰ Product description
This full automatic double layer food industrial sterilizing retort autoclave adopts high temperature and high pressure sterilization technology, double-layer structure, hot water circulation, immersion sterilization and spray sterilization for customers to choose.
• According to the material divided into carbon steel type and stainless steel type.
• According to the sterilization method divided into spray type, water bath type, steam type and rotary type.
• According to the heating method divided into steam heat type andelectric heat type.
• According to the structure divided into single-deck type, double-deck type, two-pot parallel type and three-pot parallel type.
Ⅱ Main Model
| Type | Total capacity(m³) | Treat capacity(m³) | Trolley number | Basket number |
| ATP700*1200 | 0.46 | 0.25 | 1 | 3 |
| ATP900*1800 | 1.1 | 0.57 | 2 | 8 |
| ATP1000*2400 | 1.8 | 1.0 | 3 | 12 |
| ATP1200*3600 | 4.0 | 2.0 | 4 | 20 |
Note: If the above model is not available, please tell us the treat capacity you need. We can customize it for you.
Ⅲ Technical parameters
| Name | Technical Data |
| Test pressure | 0.44Mpa |
| Design pressure | 0.35 Mpa |
| Maximum operating pressure | 0.30 Mpa |
| The maximum operating temperature | 143℃ |
| Design temperature | 147℃ |
| Heating method | Electric heating or using steam boiler as heat source |
| Voltage | 380 V 3 phase 50Hz(can be customized) |
| Material | SUS304 stainless steel |
| Water quality requirement | Sterilizing water, cooling water for tap water, not more than 25 mg/L chloride ion content |
Ⅳ Our advantages
1. A small quantity of the process watercan circulated quickly to amount to the expected sterilizing temperature.
2. It produces low noise, creating quiet and comfortble working environment.
3. It takes perfect control of the temperature. During the whole process, the pressure is constantly adjusted to the the change of the pressure inside the packages, which can make the deformability of the packages go down to the lowest. It is especially suitable for the packages with air.
4. The system preheated by precess water (optional) can ensure that the temperature of the heat-insulated and heat-filled products rise continuously.
5.with the most high quality flange and capped end,cool shaped in one time ,and by vibration, so not to blend at all.
6. Pot with Grinding tecnology to impove the surface hardness and slushing .especially chlorine in cooling
