Luy Machinery Equipment CO., LTD
Customized Autoclave Carbon Steel or Stainless Steel
Add to Cart
Not Using Chemicals Wood Heat Treatment Equipment More Than 10 Years Experience
Ⅰ Product description
Wood heat treatment equipment is mainly used for the production of thermo wood, and through high temperature treatment to let the wood to achieve the purpose of anti-corrosion pest control and other purposes. Treated wood has a natural texture and beautiful appearance. Due to not need chemicals in the process, it is more environmentally friendly.
The thermo wood produced can be used for indoor and outdoor wooden floors, wooden houses, wooden pavilions, etc., and has a wide range of uses.
Compared to the conventional carbonization tank, this thermo wood machine does not require a boiler and has a low investment cost. It is very suitable for investors who want to start a new project.
Ⅱ Technical parameters
| Name | Wood heat treatment equipment |
| Design temperature(℃) | 240℃ |
| Using temperature(℃) | 190--220℃(you can adjust it by yourself) |
| Design pressure(Mpa) | 0.85Mpa |
| Working pressure(Mpa) | 0.1-0.7Mpa |
| Design vacuum degree(Mpa) | -0.098mpa |
| Tank material | Q345R carbon steel |
| Inside tank heat material | Stainless steel |
| Heat ways | Electric heating or boiler heating |
| Cooling ways | Natural cooling |
| Tank heat preservation | outside with double heat preservation ,outside is stainless steel plate protective |
| Heat distribution | hot wind reciprocate circulation |
| Open door ways | Manual open door |
| Model | Effective Diameter(mm) | Effective Length(mm) | Total capacity(m3) | Effective treat capacity(m3) |
| T1800*6000 | 1800 | 6000 | 15.5 | 8 |
| T1800*8000 | 1800 | 6000 | 20.3 | 10 |
| T2200*6000 | 2200 | 8000 | 23 | 11 |
| T2200*8000 | 2200 | 8000 | 31 | 16 |
Ⅲ Technology Process
Put the wood into the tank, then high temperature steam dry in the tank, then high temperature heat treatment, then cooling, then balance the pressure and recover the room temperature, then take the wood out, Finish.
Ⅳ Our advantage
1. Compared with the traditional box-type drying kiln, our thermo wood machine using cylindrical structure, the temperature distribution is more uniform, the produced wood has no cracking, no deformation, and the qualified rate is higher.
2. Use PLC touch screen automatic control, more secure and reliable.
3. About the structure, our company has special inspection and testing, must do testing. The government inspection department will issue a certificate of conformity.
